Bar Clamps

Description:


Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 pounds per square inch of tensile strength. The fast-acting sliding head is acme threaded to accommodate a cold-drawn steel screw with a large easy-grip handle and swivel pad. And our original multiple-disc-clutch design allows the sliding head to hold securely at any point along the bar. Available in a wide variety of sizes and clamping forces for light-duty, medium-duty, and heavy-duty applications.

HEAVY DUTY

Product Number Max Opening Reach Clamping Force Bar
3706-HD 6 in. 3 in. 1,000 lb. 1 x 5/16 in.
3712-HD 12 in. 3 in. 1,000 lb. 1 x 5/16 in.
3718-HD 18 in. 3 in. 1,000 lb. 1 x 5/16 in.
3724-HD 24 in. 3 in. 1,000 lb. 1 x 5/16 in.
3730-HD 30 in. 3 in. 1,000 lb. 1 x 5/16 in.
3736-HD 36 in. 3 in. 1,000 lb. 1 x 5/16 in.

MEDIUM DUTY

Product Number Max Opening Reach Clamping Force Bar
3706 6 in. 2 1/2 in. 600 lb. 3/4 x 1/4 in.
3712 12 in. 2 1/2 in. 600 lb. 3/4 x 1/4 in.
3718 18 in. 2 1/2 in. 600 lb. 3/4 x 1/4 in.
3724 24 in. 2 1/2 in. 600 lb. 3/4 x 1/4 in.
3730 30 in. 2 1/2 in. 600 lb. 3/4 x 1/4 in.
3736 36 in. 2 1/2 in. 600 lb.

3/4 x 1/4 in.

LIGHT DUTY

Product Number Max Opening Reach Clamping Force Bar
3704-LD 4 in. 2 in. 300 lb. 5/8 x 3/16 in.
3706-LD 6 in. 2 in. 300 lb. 5/8 x 3/16 in.
3708-LD 8 in. 2 in. 300 lb. 5/8 x 3/16 in.
3712-LD 12 in. 2 in. 300 lb, 5/8 x 3/16 in.

Description:


Jorgensen aluminum bar clamps have an excellent strength-to-weight ratio, making these strong, lightweight bar clamps perfect for both commercial and DIY applications. The bars are crafted from an anodized, rust-resistant aluminum, and their rectangular design creates a stable clamping surface for edge gluing. The tail-stop’s trigger spring takes advantage of notches on the bar to lock into place.

Product Number Max Opening Reach Clamping Force Handle

Bar

3524 24 in. 1 5/8 in. 1,000 lb. Sliding Pin 1 5/16 x 13/16 in.
3536 36 in. 1 5/8 in. 1,000 lb. Sliding Pin 1 5/16 x 13/16 in.
3548 48 in. 1 5/8 in. 1,000 lb. Sliding Pin 1 5/16 x 13/16 in.
3560 60 in. 1 5/8 in. 1,000 lb. Sliding Pin 1 5/16 x 13/16 in.
3572 72 in. 1 5/8 in. 1,000 lb. Sliding Pin 1 5/16 x 13/16 in.

Description:


When your project calls for a deeper hold, reach for Jorgensen deep throat steel bar clamps. They contain all the same high-quality materials as our traditional steel bar clamps but with five-inch, seven-inch, and nine-inch reaches. And welders take note: the copper-plated screws, handles, and swivels help protect against weld spatter in welding jobs.

FIVE INCH

Product Number Max Opening Reach Clamping Force Handle Bar
4512 12 in. 5 in. 1,200 lb. Soft grip 1 3/8 x 5/16 in.
4524 24 in. 5 in. 1,200 lb. Soft grip 1 3/8 x 5/16 in.
4536 36 in. 5 in. 1,200 lb. Soft grip 1 3/8 x 5/16 in.
4548 48 in. 5 in. 1,200 lb. Soft grip 1 3/8 x 5/16 in.
4560 60 in. 5 in. 1,200 lb. Soft grip 1 3/8 x 5/16 in.

SEVEN INCH

Product Number Max Opening Reach Clamping Force Handle Bar
4712 12 in. 7 in. 1,200 lb. Soft grip 1 1/2 x 3/8 in.
4724 24 in. 7 in. 1,200 lb. Soft grip 1 1/2 x 3/8 in.
4736 36 in. 7 in. 1,200 lb. Soft grip 1 1/2 x 3/8 in.
4748 48 in. 7 in. 1,200 lb. Soft grip 1 1/2 x 3/8 in.
4760 60 in. 7 in. 1,200 lb. Soft grip 1 1/2 x 3/8 in.
4772 72 in. 7 in. 1,200 lb. Soft grip 1 1/2 x 3/8 in.

NINE INCH

Product Number Max Opening Reach Clamping Force Handle Bar
4912 12 in. 9 in. 1,200 lb. Steel sliding pin 1 1/2 x 3/8 in.
4924 24 in. 9 in. 1,200 lb. Steel sliding pin 1 1/2 x 3/8 in.
4936 36 in. 9 in. 1,200 lb. Steel sliding pin 1 1/2 x 3/8 in.
4948 48 in. 9 in. 1,200 lb. Steel sliding pin 1 1/2 x 3/8 in.
4960 60 in. 9 in. 1,200 lb. Steel sliding pin 1 1/2 x 3/8 in.
4972 72 in. 9 in. 1,200 lb. Steel sliding pin 1 1/2 x 3/8 in.

Description:


“Look, Ma! One hand!” Unique Jorgensen E-Z HOLD bar clamps allow for rapid and easy clamping and can easily be converted to spreader clamps. The contoured comfort grip and quick-release lever make it simple to get a firm grasp, and our exclusive patented feature lets you join two clamps together to create a clamp with more than double the opening capacity of a single clamp. Deep-reach pads help protect your work.

MEDIUM DUTY

Product Number Max Opening Reach Clamping Force Handle
33406 6 in. 3 3/8 in. 300 lb. Grip lever
33412 12 in. 3 3/8 in. 300 lb. Grip lever
33418 18 in. 3 3/8 in. 300 lb. Grip lever
33424 24 in. 3 3/8 in. 300 lb. Grip lever
33436 36 in. 3 3/8 in. 300 lb. Grip lever

LIGHT DUTY

Product Number Max Opening Reach Clamping Force Handle
33606 6 in. 2 1/2 in. 150 lb. Grip lever
33612 12 in. 2 1/2 in. 150 lb. Grip lever

Description:


Pony Jorgensen's most affordable E-Z HOLD bar clamps are ideal for hobby and craft projects. They come with all the same features of our medium- and light-duty E-Z HOLD clamps, except for the ability to join two clamps together.

Product Number Max Opening Reach Clamping Force Handle
33804 4 in. 1 1/2 in. 50 lb. Grip lever
33808 8 in. 1 1/2 in. 50 lb. Grip lever

Description:


For hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers, and professional tradespeople seeking a bar clamp with superior rust resistance, look no further than the Jorgensen drop-forged bar clamp. The drop-forged steel bar is chrome plated to ward off rust longer, and a heat-treated acme screw provides increased durability.

Product Number Max Opening Reach Clamping Force Handle Bar
75306 6 in. 3 in. 450 lb. Steel sliding pin 1/4 x 5/8 in.
75312 12 in. 3 in. 450 lb. Steel sliding pin 1/4 x 5/8 in.
75318 18 in. 3 in. 450 lb. Steel sliding pin 1/4 x 5/8 in.
75418 18 in. 4 1/2 in. 1,000 lb. Steel sliding pin 3/8 x 7/8 in.

1 – 6 products of 9